A process engineer and quality engineer review validation documentation on a medical device plant floor

The launch date is on the calendar. The team knows it may be at risk. But the hiring plan was built from the org chart: plant leader first, then a few operators, then engineering and quality when the need becomes urgent.

That order can leave the people who own the process arriving after the work has already reached a critical gate.

A medtech launch usually slips on sequencing, not sourcing. The hiring plan needs to follow the work required to get a product into repeatable production, not the titles that are easiest to approve.

Start with the gates

A launch date is not just a target for the team to rally around. It is tied to work that has to be completed in sequence.

That work may include design transfer, process characterization, equipment qualification through IQ/OQ/PQ, process validation runs, Device Master Record (DMR) approval, and supplier qualification. The exact plan depends on the product and its regulatory pathway. But the dependencies matter: people have to define, build, document, and verify the process before production can scale around it.

A hire who starts after a gate has passed does not save that gate. They inherit the open work, the missing documentation, and the pressure on the next milestone.

So don't build your hiring plan forward from an org chart. Work backward from the validation run.

Hire for the work, not the title hierarchy

Before a validation run, the manufacturing process has to exist and be characterized. Equipment and methods need to be understood. The relevant documents need to be in place. Operators need a process they can be trained to follow.

Quality engineering needs to be involved before validation, not called in afterward to review a finished packet. Otherwise, the team risks finding gaps in controls, inspection methods, or records when there is little time to address them.

That gives you a practical hiring sequence. Some roles need to start together. Others should wait until the work is ready for them.

Hiring order follows the work, not the title hierarchy.

The roles that carry the launch

1. Manufacturing or process engineer

Start here. This person turns the intended design into a workable manufacturing process. They work through equipment, methods, process parameters, and the protocols needed to demonstrate that the process performs as intended.

The role needs to match the launch work. A process engineer who has only supported mature production may not have the same experience as someone who has built or transferred a process into a regulated manufacturing environment.

Write the brief around what the person must own: which processes, equipment, transfer activities, and validation work are in scope. Don't rely on the title to explain the job.

2. Quality engineer, alongside the process engineer

Bring quality engineering into the work early. This person helps define the control plan, inspection methods, nonconformance handling, and the documentation that supports validation and production readiness.

They should be close enough to the process development to spot gaps while the team can still address them. They may also support records linked to the DMR and the quality-system requirements that apply to the launch. CAPA and ISO 13485 may be relevant to that broader work, but neither replaces early involvement in the process itself.

A quality engineer examines a medical device component at an inspection bench with inspection equipment and records

3. Supplier quality or supply chain ownership

Assign someone to supplier qualification early. New components and new suppliers can move on a different timeline from process development, and that work often has no clear owner. Then a component issue appears just as the production team is preparing to run.

Supplier quality may own qualification activities; supply chain may coordinate sourcing and readiness. The right structure depends on your company. The important thing is that ownership is clear and the work runs in parallel with process and quality preparation.

This is the hire, or assigned responsibility, that launch teams often forget.

4. Production supervisor

Bring in the supervisor when the process is becoming repeatable and the team can define how the line will operate. The supervisor owns day-to-day line execution, shift structure, staffing, and training on the floor.

This role is often hired first because a manager title is easy to justify. It can be the wrong first hire if there is no stable process or clear plan for what the supervisor will lead. An early supervisor may help shape the production plan, but they cannot substitute for process engineering or quality work that has not been done.

5. Operators and technicians

Hire operators and technicians when the process, training approach, and ramp plan are ready to support them. Bring them in too early, and they may spend their time waiting for equipment, instructions, or approved work methods. That can mean avoidable cost and turnover.

Plan for the actual path to productivity. New hires need time to learn the work and demonstrate they can perform it. Cleanroom gowning and qualification add steps before someone is ready to work independently. Ramp curves, second-shift needs, and weekend coverage also affect how many people you need and when they should start.

A production supervisor trains operators at a cleanroom gowning station

Why launches slip on hiring

The problem is often not that a search is poorly run. It is that the search starts when a gate is already close.

A few patterns repeat:

  • The search starts when the gap becomes visible. A specialist is needed well before the milestone that exposes the missing work.
  • The process engineer posting is built around a title. It lists broad responsibilities but does not explain the equipment, process, transfer, or validation work the hire will own.
  • R&D is expected to hand off and walk away. A strong R&D engineer may help transfer the design, but process ownership and production readiness still need to be assigned.
  • Quality is treated as a post-launch audit function. That leaves quality engineering outside decisions that shape controls, inspection, and validation records.
  • No one owns the full ramp hiring plan. Each manager fills their own opening, but nobody connects the hiring dates to gates, training, and shift coverage.

A clear owner does not need to be a new executive. It does need to be someone who can keep the gate timeline and hiring plan connected.

Lead times matter more than start dates

A start date is useful only if the person arrives in time to do the work that depends on them.

Specialists in medical device manufacturing with cleanroom, validation, and regulated-environment experience make up a narrower talent pool in many US markets than general manufacturing candidates. Searches for that experience can run on a longer clock. Start early enough to explain the actual work, assess relevant experience, and make a considered decision.

Operator pipelines can often be built faster. But speed does not remove the need for a training and shift plan. If operators are hired before the process and training path are ready, an earlier start date may not move the launch forward.

The useful question is not just "When do we want this person to start?" It is "What work must this person complete before the next gate, and how long will it take to find and onboard the right person?"

Pick a recruiting model that fits the hiring

No single medtech recruiting model fits every launch. The right one depends on the volume and repeatability of the hiring, not on a preferred package.

  • One or two defined, hard-to-fill technical roles: Contingency placement can fit when the role is clear and you want search support without an upfront commitment.
  • A steady stream of hires across functions over several months: Fractional recruiting provides dedicated recruiting capacity without adding a full-time internal recruiter.
  • A plant manager, site head, VP of Operations, or VP of Quality on the critical path: Retained search provides a focused process for a senior or critical hire.

Good medical device recruiting starts with the launch work, not the job title. A recruiter who understands the gates knows which roles can wait and which ones are already late. That is the difference between a search that supports the launch and one that just fills a seat.

Before you post the role

Check that the brief answers these questions:

  • What are the validation and gate dates?
  • What shift pattern and ramp curve will the hire support?
  • Which equipment and processes are in scope?
  • What device classification and regulatory pathway apply?
  • Who owns the DMR?
  • What training and qualification steps must be completed?
  • What should this person deliver in their first 90 days?

If you can't answer these yet, clarify the work before you post. A sharper brief gives candidates a clearer picture and gives your team a better basis for assessing fit.

Get the order right

The launch needs people in the order the work requires them. Build backward from validation. Bring process and quality together early. Give supplier qualification a clear owner. Add production leadership and frontline staff when the process and ramp plan can support them.

That is a simpler way to staff a launch, and a more practical way to keep hiring connected to the gates.